Hide gps features, Initialize gps – Lowrance electronic LCX-17M User Manual

Page 157

Advertising
background image

149

2. Set

S

PEED

to zero. Select

S

TEER WITH

A

RROWS

command and press

ENT,

which turns on the simulator and returns you to the Map Page

.

3. Begin navigating along the trail/route. (If you are close enough to the
first waypoint, the arrival alarm will usually go off as soon as
navigation begins. Press

EXIT

to clear the alarm.) When navigation

starts, press

↑ to increase speed to the desired setting.

4. Press

EXIT

to turn off the steering and speed boxes. The unit will now

automatically "steer" along the trail or route. When you arrive at your
"destination," cancel navigation as you normally do.

Tip:

You can pick any spot on the map to begin your simulation session
by using the Initialize GPS command. This makes your unit think
it's located at the position you select.

Hide GPS Features

If there is no GPS antenna/receiver module attached to this unit, the
GPS menus and features can be hidden from view with this command.
The default setting is off, allowing you to rotate between the Sonar
Page and the GPS pages and features. To hide GPS features:

Press

MENU|MENU|

to

S

YSTEM

S

ETUP

|ENT|

to H

IDE

GPS F

EATURES

|

ENT

. The

GPS menus and pages are now hidden.

To restore

GPS F

EATURES

,

press

MENU|MENU|

to

S

HOW

GPS F

EATURES

|

ENT.

The GPS menus and pages are available once again.

Initialize GPS

This command makes the unit operate as if it is sitting someplace other
than its actual location. So, you and your unit could be located in
Kansas City, but practice navigating in the ocean off Islamorada,
Florida.

1. With the GPS simulator off, press

MENU|MENU|

to

GPS

S

ETUP

|ENT|ENT.

2. A message appears, telling you to move the cursor near the desired
location and press

ENT.

When the message automatically clears, follow

the message instructions. Turn on the GPS Simulator.

3. In a moment, your present position marker arrow appears on the
map in the location you selected with the cursor. The unit will consider
that spot as its last known position until changed by either a live
satellite lock-on or a new simulator location.

Advertising