Lanier 5618 - Manual (Page 44)

Bypass Copying
4 - 2 Copying Methods
3
Lightly insert the copy paper face down and
adjust the paper guide.
(1) Horizontal size
(2) Vertical size
(3) Paper Extender
(4) Paper Guide
•
Do not stack paper over the limit mark;
otherwise a skew image or paper
misfeeds might occur.
•
Set the direction of the copy paper to
landscape.
•
Swing out the extender to support larger size copy paper (larger than 8 1 /2”× 11").
•
Fan paper to get air between the sheets and avoid a multi-sheet feed.
When Copying onto OHP Transparencies
Lightly insert the OHP transparencies face up and
adjust the paper guide.
4
Push down the paper guide release lever.
•
If you set 8 /2” x 11" or larger copy paper,
hold the edge of the paper and push down
the paper guide release lever.
•
If you do not push down the paper guide
release lever, a misfeed might occur.