Lanier 5618 - Manual (Page 63)

Copier Feature Settings
User Tools Settings 5 - 7
Copier Features
Menu Description
1. APS.Auto R/E You can select Auto Paper Select or Auto R/E Priority.
When you cancel this setting, select “No”.
Default: Auto Paper Select
2. Max.Copy Q'ty The maximum copy quantity can be set between 1 and 99.
Default: 99
3. Adjust Orig. Mode You can adjust the quality level of copies for each of the
original types. As a default setting, Text is selected as
original type. You can change it to Photo.
Default: Text
4. Set Ratio Select which Reduce, Enlarge, or Input Ratio is shown on
the panel display with priority when the Reduce/Enlarge key
is pressed.
Default: 50%
5. Copy Reset Timer The machine returns to its initial condition automatically
after your job is finished. The time can be set from 10 to
999 seconds, or Off.
Default: On / 60 sec.
6. SADF Auto Reset When you set one original at a time in the optional
document feeder, the message is displayed. It shows the
document feeder is ready for another original. You can
adjust this time from 3 seconds to 99 seconds in 1 second
steps.
Default: 4 seconds
7. R.Sort Aut.Cont If you select “Off” when the paper tray in use runs out of
paper, the machine stops allowing you to add paper to the
tray so you can have all the copies rotate-sorted.
Default: Off
8. Orientation You can select the paper orientation (“Top to Top” or “Top
to Bottom”).
Default: Off
9. Sort You can select a Sort function.
Default: Rotate Sort
10. Duplex Priority You can specify which duplex mode is used when the key
is pressed.
• 1 sided to 2 sided
• 2 sided to 2 sided
Default: 1 sided to 2 sided