Life Fitness 4000 - Manual (Page 8)

After placing the unit in its intended location for use, begin a Life Fitness workout program (see Operating
Instructions & Program Descriptions) but DO NOT run. It is important to ensure that the STRIDING BELT remains
centered during operation. If the BELT drifts to the RIGHT, see Figure A.. If the BELT drifts to the LEFT, see
Figure B.
NOTE: IT IS EXTREMELY IMPORTANT THAT THE TREADMILL LEVELING LEGS BE CORRECTLY
ADJUSTED FOR PROPER OPERATION. AN UNBALANCED UNIT MAY CAUSE STRIDING BELT
MISALIGNMENT AND POSSIBLY DAMAGE THE TREADMILL.
NOTE: IL EST EXTRÊMEMENT IMPORTANT QUE LE TAPIS ROULANT NIVELANT DES JAMBES SOIT
CORRECTEMENT AJUSTÉ À L'CEXÉCUTION APPROPRIÉE. UNE UNITÉ NON ÉQUILIBRÉE PEUT CAUSER
LA DÉVIATION D'ALIGNEMENT DE CEINTURE DE PROGRÈS ET PROBABLEMENT
ENDOMMAGER LE TAPIS ROULANT.
Before attempting to operate your Life Fitness treadmill, it is imperative that
you familiarize yourself with the contents of the Operation Manual. If your
treadmill does not respond as described in the OPERATION MANUAL
contact:
Life Fitness Customer Support Services
at (800) 351-3737 or (847) 451-0036
Prior to your call, please be sure you have located and noted the
MODEL and SERIAL NUMBER (G) of your
Life Fitness treadmill. This information is contained on a label located on the front of the lift crossbar of the
treadmill.
Copyright 1999 Brunswick Corporation. All rights reserved. Life Fitness is a registered trademark of Brunswick Corporation.
M051-00K20-C078
G