Connecting devices – LG LN735 Series User Manual

Page 19

Advertising
background image

19

Connecting devices

6.

Plug the small end of the cigarette lighter
adapter into the power supply connector at the
side of the unit.

7.

Plug the other end into your vehicle’s 12V
(cigarette lighter) socket.

8.

To adjust the angle of the mount, slacken the
adjustable knobs at the suction-cup and then turn
it gently. In addition to tilting the mount up and
down and from side to side, you can also rotate
the mount, from the left, -45-45

°.

9.

When you finish, tighten up the knobs again.

• This unit and its cigarette lighter adapter are

designed for use in vehicles that have 5 -5.4V,
negative ground electrical systems.
(This is a standard for most vehicles.)
If your vehicle has a different type of electrical
system, the DC power system cannot be used.

• When attaching the mount, remove impurities from

the surface before attaching, and press the lever to
avoid falling.

• Adjust the direction of the mount to prevent it from

disturbing the driving.

• Adjust it to an angle you can see well.

• Be careful of not to make the unit fall from

windscreen when you drive.

• The arm of the mount may vibrate. Attach the mount

close to the dashboard as much as you can.

Advertising