Lenovo ThinkPad 40Y8626 - Manual (Page 22)

v 4.00.950C means that your version is Windows 2000 OSR2.5.
Enabling the DMA setting
This section explains enabling the DMA setting with Windows 2000 and Windows
XP.:
For Windows 2000
1. Click Start , move the cursor to Settings , and click Control Panel .
2. Double-click System .
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE .
7. Select the DMA is available as the Transfer Mode.
8. Click OK .
9. Click Close to close System Properties window. A message displays, informing
you that the system settings have changed.
10. Click OK to restart the system.
For Windows XP
1. Click Start , move the cursor to My Computer , and click on it.
2. Click on View system information under System Tasks.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE .
7. Click the Advanced Settings tab.
8. Select DMA if available as the Transfer Mode.
9. Click OK .
10. Click Close to close the System Properties window.
Installing WinDVD and viewing a DVD movie
To install WinDVD, go to the
″Software″
section of the Software and User’s Guide
CD.
After you install the CD-RW/DVD Combo II Ultrabay Slim Drive and WinDVD,
you can view a DVD movie. But first you need to set the DVD region code for
your DVD content.
DVD region codes
DVD region codes help protect the contents of a DVD. The world is divided into
six regions and specific content can be viewed only in the appropriate region. For
example, content for Region 1 can be viewed only in the U.S. and Canada.
WinDVD is also region–specific.
You can verify the region code of the content by looking at the region code symbol
on the back of the content packaging.
Region code Region
1 U.S., Canada
2-4 ThinkPad CD-RW/DVD-ROM Combo II Ultrabay Slim Drive: User’s Guide