Lindy 25020 - Manual (Page 10)

10
6 PRODUCT SPECIFICATIONS
Models 16-Port Switch Other model not available
Standards ! IEEE 802.3u: 100BASE-TX
! IEEE 802.3: 10BASE-T
!
Ports ! Sixteen (16) 100BASE-TX/10BASE-T !
Media Support ! 100BASE-TX: Category 5 TP
! 10BASE-T: Category 3, 4 or 5 TP
!
Bandwidth ! 100BASE-TX: 200/100Mbps via Auto-Negotiation
! 10BASE-T: 20/10Mbps via Auto-Negotiation
!
Forwarding/
Filtering Rate ! 148810 packets/second per port @ 100Mbps, maximum
! 14881 packets/second per port @ 10Mbps, maximum
Latency ! 8.5 µ sec @100Mbps, minimum
! 67 µ sec @ 10Mbps, minimum
MAC Addresses ! 8K Six (6)-byte entries maximum, Self-Learning
Buffer Memory ! 4M bits
Duplex Modes ! Auto-Negotiation !
Auto-MDIX ! All TP ports support Auto-MDI/MDIX function
DIP Switches ! Two (2) for Home VLAN setting
! Four (4) for TRUNK setting
!
LED Indicators ! One (1) for Power
! One (1) per port for Link/ACT
! One (1) per port for Full-Duplex or Collision
! Two (2) for Home VLAN status
! Four (4) for TRUNK Group status
Power Supply ! Internal full range switching power supply
! Input voltage: 100 ~ 240V AC +/-10%, 50/60 Hz
Power
Consumption ! 9.9W maximum
Environment ! Operating Temperature: 0 ° ~ 45 ° C (32 ° ~ 113 ° F)
! Storage Temperature: -20 ° ~ 70 ° C (-4 ° ~ 158 ° F)
! Humidity: 10% ~ 90% Non-Condensing
Certifications ! FCC Class A, CE Mark and TUV approved
Dimensions ! 250 x 150 x 43 mm (9.8 x 5.9 x 1.7 inches) !
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to
Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference
in a commercial environment.
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
CE MARK WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.