Lindy 25020 User Manual
Page 7
7
3
INSTALLATION
This 16-Port Switch is "Plug-&-Play". They do not require software configuration. Users can immediately use any of the features
of this product simply by attaching the cables and turning on the power.
3.1
LOCATE THE SWITCH
ƍ
Attach the Four (4) rubber feet included in the product package to the bottom of the Switch, one in each corner.
ƍ
Place the Switch on a clean, flat desk or table top close to a power outlet.
ƍ
Plug in all network connections and the power cord.
3.2
RACKMOUNT PLACEMENT
This Switch can be mounted in an EIA standard-sized 19-inch rack.
Attach One (1) rackmounting bracket on each side of the Switch’s front panel with the provided screws.
Use the other provided screws to secure the Switch to the rack.
* An “Long-Ear” rackmount kit (description “Rack-02”) is available as an option.