LG LSS-3200A - Manual (Page 112)

111
8-21. Testing the System
Transponder Test
When in Satellite mode, diagnoses all transponder signals of each Satellite. Once the
Transponder Test is done, all transponder signal status of the selected Satellite will be dis-
played.
To test the Transponder:
1. Press the MENU button on the Remote Control to display the on-screen menu.
2. Scroll down using “ E ” on the remote control.
3. Select the System menu by pressing “ ”.
4. Scroll down to System Test using “ E ”.
5. Move the highlight to the right with “ G ” to display the system test option box.
6. Scroll down to Transponder Test using “ E ” on the remote control.
7. Press “ ” and the pop-up dialogue box will be displayed.
8. Select one of SAT A/SAT B/SAT C with “ FG ”.
9. Move the highlight to the Start Button and press “ ” to activate the system transponder test.
It will run automatically and if there is any problem in your system, the pop-up box will be dis-
played.
10. Press MENU button to return to the previous level or press the EXIT button on the remote con-
trol to return to TV viewing.
Note : Depending on your location in the United States, certain transponders may not be available.
It is normal for the signal strength level of a few transponders to be at zero.
8. CUSTOMIZATION