3. programming the remote control – LG LSS-3200A User Manual

Page 41

Advertising
background image

40

4-3. Programming the Remote Control

The DIRECTV

®

HD Receiver remote control is a multi-brand or universal remote control that

can be programmed to control most remote-controllable devices from other manufacturers.

1. Test your remote control

To find out whether your remote control can operate a component without programming,

turn on the component such as a VCR and press the corresponding mode button (VCR) on

the remote control while pointing at the component. Use the POWER and CH +/- buttons

to see if the component responds properly. If not, the remote control requires programming.

2. Turn on the component to be programmed, then press the corresponding mode button on

the remote control.

3. Press the POWER button and the MUTE button simultaneously. The remote control is now

ready to program the code for the component.

4. There are two ways to find the right code of the component.

First, if you press the CH +/- buttons repeatedly, the codes will change one at-a-time. Press

the POWER button after each code change. If the right code is found, the device will turn

off.

Second, enter the code number using the digit buttons on the remote control. The right

code numbers for the corresponding component can be found on the following pages.

Press the POWER button.

Again, if the code is correct, the device will turn off.

5. Press the EXIT button to store the programming code.

6. Test the remote control functions to see if the component responds properly. If not, repeat

from step 2.

NOTE

The remote control may not control

all models of other brands.

NOTE

See section 8-24 for instructions on selecting

IR or RF type control.

Advertising