LaCie Slim Blu-ray - Manual (Page 14)

LaCie Slim Blu-ray •
D
esign by
s
am
H
ecHt
Getting Connected
User Manual page 14
2.1. Connecting the USB 2.0 Y Cable
1. Connect the Y cable’s primary Hi-Speed USB 2.0 A connector
(see 1.4. Cables and Connections ) to an available USB 2.0 port
on your computer.
IMPORTANT INFO: The Y cable has two USB 2.0 connectors: the
primary A connector for signal and power and the secondary A con-
nector for additional power, if necessary. The difference is clearly
marked by a lightning bolt sticker on the secondary (power only)
connector. You must connect the primary A connector in order to
send and receive data. See
1.4. Cables and Connections .
2. Attach the other end (mini USB) of the USB 2.0 Y cable to your
LaCie Slim Blu-ray. See Fig. 07
3. Your drive should now be ready for use. To verify that your drive
is correctly installed and communicating with your computer,
follow these steps:
✦ Windows Users
– Right-click My Computer to select Properties > Gen-
eral. Your drive should be listed.
✦ Mac Users
– In the Apple menu, choose About This Mac > More Info
to open the Apple System Profiler . Your drive should be
listed under Hardware .
4. If your Slim Blu-ray does not appear to be receiving adequate
power, attach the secondary USB 2.0 A plug (with the lightning
sticker) to an available USB 2.0 port on your computer. See
Fig. 08 .
TECHNICAL NOTE: Your drive must be connected to a USB 2.0
port. Performance is not guaranteed with USB 1.1. See section 1.4.
Cables and Connections .
TECHNICAL NOTE: For more information on USB connections,
see sections 1.4. Cables and Connections and 4.7. USB Questions
& Answers .
IMPORTANT INFO: The LaCie Slim Blu-ray includes a power
supply connection (see 1.2. Minimum System Requirements ) that will
accept an external power supply (not included).
2. Connecting Your LaCie Slim Blu-ray
Fig. 07
Fig. 08