Lenovo THINKCENTRE 6396 - Manual (Page 100)

Replacing a memory module
This section provides instructions on how to replace a memory module.
1. Open the computer cover. See “Opening the cover” on page 84.
2. Locate the memory connector. See “System board locations” on page 83.
3. Remove the memory module being replaced by opening the retaining clips as
shown.
4. Insert the notched end 2 of the memory module into the socket 1 . Press the
memory module firmly, and pivot the memory module until it snaps into place.
Make sure that the memory module is firmly fixed in the connector and does
not move easily.
5. Go to “Completing the FRU replacement” on page 103.
94 Hardware Maintenance Manual