LumiSource BoomChair Blast - Manual (Page 5)

5
(TV)
AUDIO
OUT
CONNECTING TO PORTABLE AUDIO / VIDEO DEVICES
CONNECTING DIRECTLY TO TV / AUDIO / VIDEO DEVICES
Step 1: Connect the Red/White ends of RCA cord (3b) into RCA INPUT (G) of BoomChair®.
Step 2: Connect the other ends of RCA cord (3b) into AUDIO OUTPUT of Audio/Video device.
Step 3: Turn Boomchair® on by turning Power knob (C) clockwise.
Step 4: Turn Audio/Video device on.
POWER
INPUT OUTPUT
R R
L L
VIBRATION
+
BASS/TREBLE
+
VOLUME
+
TV
VCR
DVD
Stereo
Satellite Receiver
Other Devices
Step 1: Connect the Red/White ends of RCA cord (3a) into RCA INPUT (G) of BoomChair®.
Step 2: Plug the single end of the RCA cord (3a) into the headphone jack of your device.
Step 3: Turn Boomchair® on by turning Power knob (C) clockwise.
Step 4: Turn portable device on and make sure the volume is turned up.
POWER
INPUT OUTPUT
R R
L L
VIBRATION
+
BASS/TREBLE
+
VOLUME
+
iPod™ *
MP3 Player
Portable Audio Device
PSP™
Nintendo DS™
Portable Game Device
3a
3b
Note: This is an easy connection if you already have your tv hooked up to a DVD or game console or are using an HDMI cable. If your
TV does not have AUDIO OUTS, you will have to use one of the alternate connections in this manual.
* Note: Some Apple™ devices such as iPhone™ require special 1/8in. (3.5mm) TTY adaptor (sold separately).