Lowrance electronic iFINDER GO - Manual (Page 72)

66
This example shows the Pop-up Help message for the Go To Cursor
command, located on the Map Menu in Advanced Mode.
Reset Options
To reset all features to their factory defaults:
In Advanced Mode
1. Press MENU | MENU |
↓ to
S
YSTEM
S
ETUP
| ENT |
↓ to
R
ESET
O
PTIONS
| ENT |
←
to Y ES
| ENT .
In Easy Mode
Hold down the PAGES key while you press PWR to turn the unit on.
NOTE:
Reset Options does not erase any waypoints, routes, icons or plot trails.
Advanced Mode's Reset Options command.
Require WAAS
You can force iFINDER to require WAAS for reporting a valid position.
(The default setting, off, uses WAAS automatically, but doesn't require
it to yield a position.) Here's how to turn it on and off in Advanced Mode.
1. Press MENU | MENU |
↓ to
GPS S
ETUP
| ENT |
↓ to
R
EQUIRE
WAAS | ENT .
2. To return to the last page displayed, press EXIT | EXIT .
3. You can return to this command and press ENT again to turn the fea-
ture off.