LG BD270 User Manual

Page 17

Advertising

Note:

Since several factors affect the resolution of video output, see “Available
resolution according to the resolution setting” on next page.

How to change the resolution using RESOLUTION
button

Press RESOLUTION repeatedly in stop mode to change the resolution.
The display window will show you the current resolution.

How to change the resolution using the [Setup] menu

Press HOME and the [Home Menu] appears.

Select the [Setup] and press ENTER. The [Setup] menu appears.

Use v V to select [DISPLAY] option then press B to move to the

second level.

Use v V to select the [Resolution] option then press B to move to the

third level.

Use v V to select the desired resolution then press ENTER to confirm

your selection.

Available resolution according to the resolution setting

Notes:
• Depending on your display, some of the resolution settings may result in

the picture disappearing or an abnormal picture appearing. In this case,
press HOME then RESOLUTION repeatedly until the picture re-appear.

• This player supports simultaneous output of all video out jacks. The

resolution of the HDMI output will not be the same as the resolution
output on the component video output.

HDMI OUT connection

• For the 480i resolution setting, real output resolution of HDMI OUT will

change to 480p.

• If you select a resolution manually and then connect the HDMI jack to

TV and your TV does not accept it, the resolution setting is set to [Auto].

• If you select a resolution that your TV does not accept, the warning

message will appear. After resolution change, if you cannot see the
screen, please wait 20 seconds and the resolution will automatically
revert back to the previous resolution.

• The 1080p video output frame rate may be automatically set to either

24Hz or 60Hz depending both on the capability and preference of the
connected TV and based on the native video frame rate of the content
on the BD-ROM disc.

VIDEO OUT connection

The resolution of the VIDEO OUT jack is always outputted at 480i
resolution.

• When the non-copy protected media is playing back

Video Output

HDMI OUT

Resolution Setting

480i

480p

720p

1080i

1080p / 24Hz

1080p / 60Hz

• When the copy protected media is playing back