LevelOne FBR-1700TX - Manual (Page 22)

LevelOne Broadband Router User Guide
18
Installation Procedure - FBR-1401TX
Figure 8: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the LevelOne Broadband Router.
Ensure the LevelOne Broadband Router and the DSL/Cable modem are powered OFF.
2. Connect LAN Cable
Use standard LAN cables to connect PCs to the Switching Hub ports on the LevelOne
Broadband Router. Both 10BaseT and 100BaseT connections can be used simultaneously.
If required, connect any port to a normal port on another Hub, using a standard LAN cable.
Any LAN port on the LevelOne Broadband Router will automatically function as an "Up-
link" port when required.
3. Connect WAN Cable
If you have a DSL modem or Cable modem, connect it to the WAN port on the LevelOne
Broadband Router. Use the cable supplied with your modem. If no cable was supplied, use
a standard LAN cable.
4. Connect Printer Cable
Use a standard parallel printer cable to connect your printer to the Printer port on the Leve-
lOne Broadband Router.
5. Power Up
Connect the supplied power adapter and power up.
Use only the power adapter provided.