LevelOne FBR-1700TX - Manual (Page 88)

LevelOne Broadband Router User Guide
84
4. The printer wizard will display a message stating that “The Network
Printer is off-line”. This is OK. Continue the Add Printer Wizard until
finished.
5. When finished, go to Control Panel-Printers. The printer icon will be
grayed out indicating the printer is not ready.
6. Right-click the Printer, and select Properties. Then select the Details
tab, as shown belo w.
7. Click the Add Port button. On the resulting screen, select Other, then
Shared Port, as the port to add, as shown below.