Life Fitness otal Body Trainer 95Xe T - Manual (Page 10)

F
ITNESS
N
ETWORKING
One type RJ45 networking port (A) allows the Total Body Trainer
to be connected to a network, such as FitLinxx
TM interactive fit-
ness network.
Fitness network: The network connection enables the con-
sole to upload user workout statistics to a fitness network
database or to download remotely stored information, such a
pre-set workout program. See Section 4.2, titled Using the
Workouts, for information on logging onto a network.
This port is located on the back of the console and is enclosed by a
removable cover. Any use of the port for other than its intended
purpose could void the product warranty.
C
ABLE
TV H
OOK
-U
P
Note to the CATV Installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building as close to the point of cable
entry as practical.
Antenna Grounding According to the NEC
Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70.
1. Antenna lead in wire
2. Antenna discharge unit (nec section 810-20)
3. Grounding conductors (nec section 810-21)
4. Ground clamp
5. Power service grounding electrode system
(nec article 250, part h)
6. Ground clamp
7. Electric service equipment
NOTE: The TV aspect of the LCD Console can only receive a analog signal. Digital cable must
be externally converted to an analog signal.
9