Lowrance electronic LMS-337C DF - Manual (Page 150)

142
Edit Route Waypoints menu.
3. Use
↓ and ↑ to select a command from the Edit Route Waypoints
menu and press ENT . Add From Map lets you insert a waypoint in the
route by clicking on a map location with the cursor. Add Waypoint calls
up the Waypoint List so you can insert a waypoint from the list. Re-
move Waypoint will delete the waypoint from the route. View Waypoint
will show you where the selected waypoint is on the map.
NOTE:
When adding waypoints to a route, the inserted waypoints will ap-
pear in the route in front of the waypoint you have selected. To in-
sert waypoints at the end of the route, make sure to select "(End of
route)" before adding them.
Navigate a Route
1. From the
N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
Route Planning command on Main Menu, left; Routes menu, center; Edit
Route menu, right. Navigate command is selected in the Action box.
2. Press
↓ to select route name|
ENT |
↓ to
N
AVIGATE
| ENT .