Lowrance electronic LMS-337C DF - Manual (Page 164)

156
Expand any categories that might contain data you want to display.
Then press
↓ or ↑ to select a different data option. With the new option
highlighted, press ENT to switch the contents of the box to the new data
type, then press EXIT . You can now select another box to change. When
you are finished with the settings, press EXIT again to end the Custom-
ize command, and the box name stops flashing.
A Page display can show a limited number of data boxes. You can not
turn them off or add more data boxes.
GPS Simulator
The GPS simulator lets you use the unit as if you were outdoors navi-
gating somewhere. It's a great way to practice using your unit. You can
set the starting location by entering latitude/longitude (Starting Posi-
tion) or from a stored waypoint, map place or POI. You can steer your
position and change speed on the map by using the arrow keys (
S TEER
WITH A RROWS
command) or by setting the track and speed in the dialog
boxes provided on the simulator menu screen.
To get to the GPS Simulator:
1. Press
MENU | MENU |
↓ to
GPS S
ETUP
| ENT .
2. Press
↓ to
GPS S
IMULATOR
| ENT . The GPS Simulator Menu appears.
The GPS Simulator menu.
Make the desired settings, then turn the simulator on by highlighting
the
GPS S IMULATOR O N
box and pressing ENT key. Press EXIT | EXIT | EXIT
to close this menu. A message and tone appear periodically, warning
you that the simulator is on. To turn the simulator off, repeat the above
steps or turn the unit off.