LG SINGLE LINE TELEPHONE LKA-200 - Manual (Page 2)

Issue 1 Jan 2006
LKA-200
_________________________________________________________________________________________________
_____________________________________________________________________________
2
1.0 REVISION HISTORY
DATE REVISION DESCRIPTION
January 15,
2006 Preliminary Issue
1 Standard version
2.0 GENERAL DESCRIPTION
The LKA-200 is a single-line telephone which primarily intended to be used in
PBX, Key System, Hybrid, and Central Office applications. Most of the telephone
features provide a solution that meets the necessary requirements.
3.0 FEATURE LISTING
The following features are inclusive of the LKA-200.
- Tone / Pulse signaling
- Flash
- Redial
- Mute
- Ringer melody and volume control
Tone or Pulse signaling - The feature allows the selection of signaling in
the Tone (DTMF) or Dial Pulse modes. The tones mode is compliant with
DTMF signaling standards
Flash - This feature will provide a temporary, timed disconnect that is used
to activate features from the serving network. This feature is activated by
pressing the assigned button follow PBX instruction. The time for a Flash is
100 ms.
Redial
- The Redial feature is a button feature. It will store the last
number dialed, up to 31 digits, and repeat the dialing upon depression of the
button. Operation is available in both Tone and Pulse mode. A dialed number
will remain in the Redial bin until another number is dialed.
Mute - This feature provides a mute of the transmission. It is assigned to a
same button of that P/M button. While the mute is in active, pressing any key
button (except ‘#’ button) will disable mute.