Lenovo LXH-GJ17L3 - Manual (Page 10)

HOW TO USE OSD
The main menu will be displayed as follows (see figure 5). If OSD window is in
Chinese when power on, press ▲ or ▼ to choose the next window. Choose
the English, then press MENU Key . for confirming. OSD window will display
in English.
1. Press the MENU-Key . to show the OSD window. See figure 5.
2. Press ▲ or ▼ to select the adjusted item, then press the MENU-key .
3. Press ▲ or ▼ to change the settings of selected item. Press MENU-key .
when desired setting is done.
4. If you want to adjust any other items, repeat steps 2-4.
5. To exit and save the setting, press ▲ or ▼ to the exit item and press
MENU-key , or leave the monitor alone for 10 seconds.
6. When the OSD window is active, it shows the input signal timing.
Figure 5 English OSD Message
ADJUSTING THE PICTURE
The description for function control LEDS
1. BRIGHTNESS & CONTRAST
1.1 BRIGHTNESS
Adjust the picture brightness.
1.2 CONTRAST
Adjust the picture contrast.
2. ADJUST POSITION
2.1 HORIZONTAL POSITION
Adjust the horizontal position of the picture.
2.2 VERTICAL POSITION
Adjust the vertical position of the picture.
3. VIDEO NOISE
10