Lenoxx Electronics HT600 - Manual (Page 10)

IB-HT600-SW-E-031503
9
DVD Home Theatre System + TV with a Video Input Jack
(BUT NO SCART)
1. Connect the 5 satellite speakers and subwoofer as shown on Page 5 (or the QUICK SETUP DIAGRAM packed
with the set).
2. Insert the video cable (yellow) into the VIDEO OUT jack on the back of your DVD HOME THEATRE SYSTEM, and
into the VIDEO IN jack on your TV. This connection will allow you to enjoy video images of normal quality.
3. Insert the AC power cord into an AC socket.
4. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Later you should
press the POWER button on the REMOTE to turn the set on (or off).
5. Select your TV’s video channel. (see page 23).
6. Go to Page 25 for playing DVDs (discs).
TV CONNECTION
NOTE: Your TV set must have a VIDEO INPUT connector (or Scart connector) for you to be able to connect and enjoy this DVD
HOME THEATRE SYSTEM.
with Video Cable Connection
ANTENNAS:
1. Your cable or antenna connection to the television should not be affected by this connection. Connect your
antenna cable to your television as you normally would. You may need to consult your television manual for
details, but no changes will be made to your current antenna connections.
2. For the home theater antenna connections, we supply an AM loop antenna. Connect this to the AM terminals.
3. For the FM antenna, you may use the indoor wire antenna we supplied or you may use an antenna
splitter & cable to connect an outdoor antenna to the FM antenna on the back of your set. Better FM reception will
probably be received with an outdoor FM antenna.