Lenoxx Electronics HT600 - Manual (Page 6)

IB-HT600-SW-E-031503
SPEAKER SYSTEM CONNECTIONS
Speaker System Connections
The speaker wires and connectors are colour-coded for easier set
up.
• Connect the Front Left speaker to the FL terminals.
• Connect the Front Right speaker to the FR terminals.
• Connect the Centre speaker to the C terminals.
• Connect the Rear Left speaker to the RL terminals.
• Connect the Rear Right speaker to the RR terminals.
• Connect the Subwoofer to the SUB terminals.
Connect the supplied speaker system using the supplied
speaker cords by matching the colours of the terminals to those
of the cords.
IMPORTANT:
Before makeing connections, make sure the power is off. At the
rear of each supplied speaker you will find two spring type
connectors in different colours: a black one (-) and a red, blue or
grey one(+).
( The Subwoofer does not have spring type
connecting tabs at the rear, only a set of black & green speaker
wires from its back.)
5
NOTE
In your package you will find 6 sets of coloured wire pairs for connecting your Home Theatre to the 6 different speakers included:
• 1 green and black pair of wires for the SP-6 subwoofer which comes out of the back of the subwoofer (12 1/2 feet long).
• 2 grey and black pairs of wires (26 feet long) for connecting the SP-5 rear speakers with grey and black terminals.
• 1 blue and black pair of wires (13 feet long) for the SP-5 center speaker with blue and black terminals.
• 2 red and black pairs of wires (13 feet long) for the SP-5 front speakers with red and black terminals.
(also included is 1 video cable for connecting to your TV set’s Video Input jack in case your TV set has no SCART jack.)