Chapter 2: getting to know the switch – Linksys SRW224 User Manual
Page 10
4
Chapter 2: Getting to Know the Switch
The Front Panel
24-port 10/100 + 2-Port Gigabit Switch with WebView
Chapter 2: Getting to Know the Switch
The Front Panel
The Switch's LEDs and ports are located on the front panel.
LEDs
System
Green. Lights to indicate the power is being supplied to the Switch.
LINK/ACT
Green. Lights to indicate a functional network link through the corresponding port (1
through 24) with an attached device. Blinks to indicate that the Switch is actively sending
or receiving data over that port.
Ports
LAN (1-24)
The LAN (Local Area Network) ports connect to Ethernet network devices, such as other
switches or routers.
Gigabit1 /Gigabit2 / The switch is equipped with two Gigabit ports and a mini GBIC port that is shared with
miniGBIB
Gigabit Port 2. If Gigabit Port 2 is being used, the minGBIC port cannot be used. They link to
high-speed network peripheral system or clients at speeds of up to
1000Mbps.
Gigabit
Green. Lights to indicate the port is working in Gigabit mode.
Console
The Console port is where you connect a serial cable from a PC’s serial port.
Figure 2-1: Front Panel