Lenovo THINKCENTRE 8804 User Manual
Page 15
Advertising
5.
Disconnect
the
power
supply
cables
1 and
2
from
the
system
board
connectors
and
from
all
drives.
6.
Remove
the
power
supply
cables
from
the
cable
clips
and
ties.
7.
Slide
the
power
supply
assembly
forward
and
remove
it
from
the
computer.
8.
Install
the
new
power
supply
assembly
into
the
chassis
so
that
the
screw
holes
in
the
power
supply
assembly
align
with
those
in
the
chassis.
Note:
Use
only
the
screws
provided
by
Lenovo.
9.
Install
and
tighten
the
four
screws
at
the
rear
of
the
chassis
to
secure
the
power
supply
assembly.
10.
Reconnect
all
the
power
supply
cables
to
the
drives
and
the
system
board.
11.
Go
to
Chapter
2.
Replacing
hardware
7
Advertising
This manual is related to the following products: