Lenovo THINKCENTRE 8804 - Manual (Page 37)

7. Close the adapter latch to retain the adapter.
8. Reinstall the PCI riser assembly into the system board.
9. Go to “Completing the parts replacement” on page 34.
Replacing the fan assembly
Attention
Do not open your computer or attempt any repair before reading the “Important safety
information” in the Safety and Warranty Guide that was included with your computer or in
the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety
and Warranty Guide or the HMM, go to the Support Web site at http://www.lenovo.com/
support.
This section provides instructions on how to replace the fan assembly.
1. Open the computer cover. See “Opening the cover” on page 5.
2. Pivot the drive bay assembly upward to gain access to the fan assembly 1 .
Chapter 2. Replacing hardware 29