LG LP 1200DXR - Manual (Page 18)

18
INSTALLATION IN CASEMENT STYLE WINDOWS
NOTE: The window installation kit can be used with casement windows between 18ʺ and 48ʺ tall.
Foam seal A
(Adhesive type)
Foam seal C
(Adhesive
type-shorter)
Joints en
Mousse A
(Type adhésif)
Joints en
Mousse C
(plus court de
type adhésif)
Sellado con
espuma A
(tipo adhesivo)
Sellado con
espuma C
(tipo adhesivo-
más corto)
1 Cut the foam seal A(adhesive type) &
C(adhesive type-shorter) to the proper
length, and attach it to the window sash and
frame. 2 Insert the vent panel assembly, including
extension panels, if needed, into the window
opening. Extend the extension panels, if
used.
Foam seal B
(Non-adhesive type)
Sellado con espuma B
(tipo adhesivo)
Joints en Mousse B
(Non adhésif)
4 Cut the foam seal B(Non-adhesive type) to
the window height. Stuff the foam seal B
between the glass and the window to
prevent air and insects from getting into the
room. 3
I N S TA L L AT I O N I N S T RU C T I O N S
Extension panel
(if required)
Vent
Panel
Type B screws
Carefully close the window. Secure the vent
panel in place with 4 type B screws, plus
one screw for each extension:
Vent panel only: 4 type B screws
Vent panel and
one extension:
5 type B screws
Vent panel and
two extensions:
6 type B screws
Two vent panels and
two extensions:
9 type B screws