Lexmark 410 - Manual (Page 103)

Menu item Description
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
Specifies SMTP server port information
Note: 25 is the default SMTP gateway port. Range is 1
‑65536.
SMTP Timeout
5–30
Specifies the amount of time in seconds before the server stops trying to
send the e
‑mail
Note: 30 seconds is the factory default setting.
Reply Address Specifies a reply address of up to 128 characters in e-mail sent by the
printer
Use SSL
Disabled
Negotiate
Required
Sets the printer to use SSL for increased security when connecting to the
SMTP server
Notes:
• Disabled is the factory default setting for Use SSL.
• When the Negotiate setting is used, your SMTP server determines if
SSL will be used.
SMTP Server Authentication
No authentication required
Login/Plain
CRAM
‑MD5
Digest
‑MD5
NTLM
Kerberos 5
Specifies the type of user authentication required
Note: “No authentication required” is the factory default setting.
Device
‑Initiated E‑mail
None
Use Device SMTP Credentials
Device Userid
Device Password
Kerberos 5 Realm
NTLM Domain
Specifies what credentials will be used when communicating to the SMTP
server. Some SMTP servers require credentials in order to send e-mail.
Notes:
• None is the factory default setting for Device
‑Initiated E‑mail.
• Device Userid and Device Password are used to log in to the SMTP
server when "Use Device SMTP Credentials" is selected.
Understanding printer menus 103