Lenoxx Electronics DSP-19A - Manual (Page 4)

IB-DSP19A-WM-E-062006 3
2. Slide the POWER switch of speaker system to the ON position (the LED indicator turns on).
3. Turn on your CD player or MP3 player or computer, adjust the VOLUME control of the
CD player/MP3 player/computer and the speaker system to the desired levels.
NOTE
• Do not play this system at maximum volume or too close to your ears for hearing safety.
• This stereo active speaker system is a low power system, it’s suitable for your CD player/
MP3 player/computer. We advise not to connect it to your home theater system or high
power devices!
•
Remember to slide the POWER switch to OFF position after use.
4. Slide the POWER switch of speaker system to OFF position after use.
SPEAKER SYSTEM OPERATION
1. Insert the included audio cable with 3.5mm plugs on
each end into the LINE OUT jack or PHONES jack of
your CD player or MP3 player or computer, and the
other end into the AUDIO IN jack of the speaker
system.
OR
OR
CD PLAYER
2. AC ADAPTOR (included)
The AC adaptor suitable for this speaker system is DC 6V 500mA, with PLUS center
polarity
. If you want to buy an adaptor, please choose only this type.
Insert the ADAPTOR plug to the AC adaptor jack of the speaker system and connect
the adaptor to a wall outlet.
IB-DSP19A-WM-E-062006.pmd 7/4/2006, 5:46 PM 4