Lenoxx Electronics DSP-19A - Manual (Page 5)

IB-DSP19A-WM-E-062006
No power.
1. Is the power switched to the OFF position? Slide it to ON.
2. Were the batteries inserted correctly? Please make sure 4 size
“ A A A ” a l k a l i n e b a t t e r i e s a r e i n s e r t e d i n t o b a t t e r y
compartment according to the + and – markings on the
bottom of the set.
3. Is the adaptor cord firmly plugged into the adaptor jack?
Insert the AC adaptor plug securely into the speaker.
Distorted sound.
1. Reduce input source volume or the speaker volume.
2. The batteries are weak, please replace the batteries with
new ones or use the supplied AC adaptor.
TROUBLE SHOOTING
Symptom Remedy
4
The POWER LED
indicator blinks or
gets dim.
The batteries are weak, please replace the batteries with new
ones or use the supplied AC adaptor.
No sound or only a
very low-level sound
is heard.
1. Check that the speaker AUDIO IN cable is connected securely
and correctly. Make sure the cable is inserted well.
2. Make sure your speaker has power and POWER switch is
in the ON position.
3. Make sure the input source CD player/MP3 player/computer
works well.
4. Adjust the speaker system and CD player/MP3 player/computer
volume control.
5. The batteries are weak, please replace the batteries with
new ones or use the supplied AC adaptor.
IB-DSP19A-WM-E-062006.pmd 7/4/2006, 5:46 PM 5