Wireless network connection, Wireless network setup – LG LASER SYSTEM - D??SC BD570 User Manual

Page 22

Advertising
background image

22

Installation

Installation

3

Wireless Network Connection

Another connection option is to use an Access
Point or a wireless router. In the example
confi guration for wireless connection below,
this player would be able to access content
from either of the PCs.

The network confi guration and connection
method may vary depending on the
equipment in use and the network
environment.

This player is equipped with an IEEE 802.11n
(2.4 GHz band only) wireless module, which
also supports the 802.11b/g standards. For the
best wireless performance, we recommend
using a IEEE 802.11n certifi ed Wi-Fi network
(access point or wireless router).

Available WiFi standards:
802.11b / 802.11g / 802.11n (single-band
2.4 GHz)

Wireless Network Connection

WAN

Wireless

Communication

PC

Access Point or
Wireless Router

Broadband
service

BD Player

Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.

NOTE

For best performance, a direct wired connection
from this player to your home network’s router or
cable/DSL modem is always the best option. If the
player is far away from your router or cable/DSL
modem, Ethernet or LAN cables are available at
many stores in lengths of 50 feet and longer. If
you do chose to use the wireless option, note that
performance can sometimes be aff ected by other
electronic devices in the home.

Wireless Network Setup

For the wireless network connection, the
player needs to be set up for network
communication. This adjustment can be done
from the [Setup] menu. Adjust the [NETWORK]
setting as follow. Setting up the access point
or the wireless router is required before
connecting the player to the network.

Preparation

Before setting the wireless network, you need
to:

connect the broadband internet to the
wireless home network.
set the access point or wireless router.
note the SSID and security code of the
network.

1. Select [Connection Setting] option in the

[Setup] menu then press ENTER ( ).

-

-
-

BD572-N-BUSALLK-ENG.indd 22

BD572-N-BUSALLK-ENG.indd 22

2010.2.1 4:43:1 PM

2010.2.1 4:43:1 PM

Advertising