LG LP-XG2 - Manual (Page 44)

43
Maintenance
Reset Lamp T Reset Lamp T ime ime
* You must reset lamp time on the menu after replacing the lamp.
Turn the power off but keep pluged in. Press the buttons on the control panel in the sequence as
below.
D E F G MENU ENTER
Lamp time will be initialized.
1
* Power is not turned on after 1500 hours’use. In this case, you can turn the power
on only by initiating the lamp time with the above operation.
* If you don’t replace the lamp after resetting the lamp time, the lamp may be dam-
aged.
POWER
MENU
SOURCE BLANK
ENTER VOL- VOL+