Lexmark C522 - Manual (Page 85)

Aligning the toner cartridges for color registration
85
Maintaining the printer
Aligning the toner cartridges for color registration
When the new transfer belt was installed and all the photoconductor units were moved from the used transfer belt to the
new one, the alignment of the toner cartridges and photoconductor units may have changed. For better color quality,
complete the following steps for color registration:
1 Turn the printer off.
2 Press and hold and while turning the printer on.
3 Release the buttons when the clock appears.
CONFIG MENU appears on the first line of the display.
4 Press until Color Alignment appears, and then press .
5 Print Alignment Page is on the first line, so press .
Wait as four pages print. Examine each page for the letters A through L.
6 Press until Set A appears, and then press .
A screen appears with a number shown in the box. The number is the current alignment.
7 On the printed sheet, choose the straightest of the 20 lines beside the letter A.
8 Press to decrease the number, or press to increase the number shown in the box to make it correspond to
the chosen number, and then press .
The Submitting Selection message appears.
9 Repeat step 6 and step 8 to set the new alignment for letters B through L.
10 Press .
11 Press until Exit Config Menu appears, and then press to complete this procedure.