Life Fitness Olympic Heavy Duty - Manual (Page 4)

OHD Accessory Rack
1. Assembly Instructions
4. For OHDHR and OHDCR (Figure 1):
Assemble the LEFT ADJUSTMENT RACK (10) to the LEFT UPRIGHT(A) using four
3/8” X 3.5” HEX SCREWS (11), two 3/8" I.D. WASHERS (12) and four 3/8” NYLOCK
NUTS (13). Tighten the SCREWS and NUTS securely.
Repeat the procedure to assemble the RIGHT ADJUSTMENT RACK (14) to the
RIGHT UPRIGHT (B)
For OHDPR8, OHDPR9 and OHDMR (Figure 2):
Assemble the LEFT ADJUSTMENT RACK (10) to the LEFT UPRIGHT(A) using four
3/8” X 3.5” HEX SCREWS (11), two 3/8" I.D. WASHERS (12) and four 3/8” NYLOCK
NUTS (13). Tighten the SCREWS and NUTS securely.
Repeat the procedure to assemble the RIGHT ADJUSTMENT RACK (14) to the
RIGHT UPRIGHT (B)