Lowrance electronic AirMap 600c - Manual (Page 21)

13
Cigarette Lighter Power Adapter
To use external DC power: Plug the power cable's cigarette lighter
adapter into a cigarette lighter receptacle. Next, pull aside the rubber
cover on the bottom of the unit and insert the other connector as shown
in the following image. A small clip on the connector should hold the
connector in place.
Attach external power cable to iFINDER.
The iFINDER can use two other optional external cables to supply a
NMEA/serial data connection or a combination of power and data. These
cables are discussed in the following segment on NMEA connections.
NMEA Cable Connections
NMEA is a standard communications format for marine electronic
equipment. For example, an autopilot can connect to the NMEA interface
on this unit and receive positioning information. The unit can exchange
information with any device that transmits or receives NMEA 0183 data.
To exchange NMEA data, Lowrance offers an optional data only cable
and a power/data combo cable. The NMEA/serial communications cable
has a standard female DB-9 connector on one end to attach your unit to
a computer's serial communications port.
The other cable combines a cigarette lighter power adapter with a DB-9
plug for a NMEA/serial com port connection to a laptop computer or
other device. This is our favorite cable for connecting the AirMap to a
laptop computer. By transmitting NMEA data to the computer, you can
get live position data for GPS-compatible mapping software.
You can also run one of our free Lowrance GPS emulators on your lap-
top, and operate it with real-time position information.