Lowrance electronic AirMap 600c - Manual (Page 29)

21
Alarms command: turns arrival, off course and anchor GPS alarms on
or off and changes alarm thresholds.
Aviation Alarms command: turns distance, time, near and inside air-
space alarms on or off and changes alarm thresholds.
Route Planning command: used to plan, view or navigate a route.
My Trails command: shows, hides, creates and deletes plot trails. Also
used to navigate or backtrack a trail.
Cancel Navigation command: turns off the various navigation com-
mands. Used to stop navigating after you have reached your destina-
tion navaid, waypoint, Point of Interest or map cursor location; or after
you reach the end of a route or trail.
Disable AirMap command: turns off Aviation Mode operation and
switches to Land Mode. See Sec. 4 for details on Land Mode Operation.
GPS Setup command: sets various GPS receiver options and runs the
GPS Simulator.
System Setup command: sets general configuration options.
Aviation Calculators command: controls several aeronautical calcula-
tors. These include: E6B flight computer functions (altitude and air speed
calculator, wind speed and direction calculator.) and a vertical navigation
calculator. alarm clock, up timer and down timer.
Sun/Moon Calculations command: finds the rising and setting times of
the sun and moon for any location on any day from the year 2000 to 2064.
This also shows the moon phase.
Trip Calculator command: shows trip status and statistics, such as trip
time, distance and average speed.
Timers command: controls settings and alarms for an up timer, a down
timer and an alarm clock.
Browse MMC Files command: this allows you to view the installed
MMC card and the files it contains.
Pages
Aviation Mode has three main Page displays that represent the three
major operating modes. They are the Satellite Status Page, the Naviga-
tion Page and the Map Page. They are accessed by pressing the
PAGES
key, which calls up the Pages Menu. You then press the left ← arrow
key or the right → arrow key to scroll among the three pages.
The Navigation Page has three display options: Aviation Map, HSI
Map and Navigation AirSpace. The Map Page has five display options:
Map Panel, Full Map, Compass Overlay, Position and Two Maps. You