Front cover removal, Gutter pad removal, Front cover removal -8 gutter pad removal -8 – Lexmark 4090-001 User Manual
Page 40
Advertising
4-8
4090-001
Front Cover Removal
1. Place a screwdriver in slot [A] and release the cover latches.
2. Slide the cover forward and off the printer.
To reassemble:
1. Slide the cover over the matching pieces on the bottom cover.
2. Press in both sides opposite the cover latches until they latch.
Gutter Pad Removal
1. Remove the front cover.
2. Remove the rear cover.
3. Remove the base assembly.
4. Scrape the old gutter pad off the base.
Advertising