Lincoln Electric 10A - Manual (Page 6)

• Powerful permanent magnet DC motor – 32 volt motor on a 40-volt
bus. Rugged aluminum die cast plate is durable and resilient in
high heat.
• Lincoln’s design philosophy adds an extra factor of safety in all
components and construction to maximize reliability and service.
• 100% software controlled — Software based controls can be
upgraded as new features become available.
• Easy access for serviceability.
• Modular construction allows for easy service/maintenance.
• Three-year warranty on parts and labor.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
Power Feed 10A Controller
www.lincolnelectric.com [6]
A CLOSER LOOK
QUALITY & RELIABILITY
Lug to Lug, 4/0, 600A, 60% duty cycle, 35 ft. K2163-35
Lug to Lug, 4/0, 600A, 60% duty cycle, 60 ft. K2163-60
Lug to Lug, 4/0, 600A, 60% duty cycle, 110 ft. K1842-110
5
ARCLINK®/LINC-NET CONTROL EXTENSION CABLES
Description Order Number
8 ft. (2.5m) Without weld cable K1543-8
16 ft. (4.8m) Without weld cable K1543-16
25 ft. (7.6m) Without weld cable K1543-25
50 ft. (15.2m) Without weld cable K1543-50
100 ft. (30.4m) Without weld cable K1543-100
CONTROL CABLE (14 PIN TO 14 PIN)
WELD POWER CABLES
Description Order Number
Set-up Options
1. The Power Feed 10A is shipped configured for easy connection to
the Lincoln TC-3 Travel Carriage and the Automatic Flux Hopper.
(115V AC required to power this configuration.)
2. The switch panel can be easily removed and used as a Remote
Control Pendant for versatile work station set-up.
3. Terminal strip access inside the Power Feed 10A to interface your
custom controls and/or PLCs, or to connect auxiliary circuits.
• Shutdown inputs can be used for limit switches, PLC inputs, etc
in order to shut down the welding operation for any reason.
• Safe and easy to use with numbered and color-coded connectors
for clear identification of inputs.
RECOMMENDED OPTIONS
Lug to Lug, 3/0, 600A, 60% duty cycle, 10 ft. K1842-10
Lug to Lug, 3/0, 600A, 60% duty cycle, 35 ft. K1842-35
Lug to Lug, 3/0, 600A, 60% duty cycle, 60 ft. K1842-60
WELD POWER CABLES
Description Order Number
0-250 ft. @ 80% Duty Cycle, Qty. 2 0-250 ft. @ 100% Duty Cycle, Qty. 3
1.
2.
3.
Printed circuit boards are environ-
mentally-shielded using Lincoln's
engineered potting and protective
frame trays.
Description Order Number
12 ft. (3.6m) K1785-12
16 ft. (4.8m) K1785-16
25 ft. (7.6m) K1785-25
50 ft. (15.2m) K1785-50
100 ft. (30.4m) K1785-100
For system configuration details, see publication E10.96 on the Power Wave AC/DC 1000™ power source.