Lincoln Electric 10A - Manual (Page 8)

T H E L I N C O L N E L E C T R I C C O M PA N Y
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the
needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond
to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability,
with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to
such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has
been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility
of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
POWER FEED 10A CONTROLLER ORDER FORM
PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE
POWER FEED 10A CONTROLLER K2362-1
RECOMMENDED GENERAL OPTIONS
Power Feed 10SM Motor Conversion Kit K2311-1
ArcLink Cable K1543-xx
Flux Hopper for Tandem Arc K389
Feeder Control Cable (14-pin to 14-pin) K1785-xx
Contact Nozzle Assembly K231-x
Contact Jaw Assembly K226R
Positive Contact Assembly K148x
Linc-Fill Long Stickout Extension K149-x
Narrow Gap Deep Groove Nozzle K386
Concentric Flux Cone Assembly K285
Tandem Arc Framework K387
Tandem Reels K390
Large Wire Twinarc Contact Assemblies K225
Tiny Twinarc Contact Assemblies K129-xx
Tiny Twinarc Solid Wire Straightener K281
TC-3 Self-Propelled Travel Carriage – Standard K325S, K325F
TC-3 Self-Propelled Travel Carriage – High Capacity K325HCS, K325HCF
Vertical Lift Adjuster K29
Horizontal Adjuster K96
Wire Reel Assembly for 50-60 lb. Coils K299
Spindle Kit - 2 in. hub K162-1
SpreadArc Oscillator K278
Flux Screen K310
Magnetic Flux Screen Separator K58
RECOMMENDED POWER SOURCE OPTIONS
Power Wave AC/DC 1000 see publication E10.96
TOTAL:
RECOMMENDED OPTIONS
GENERAL OPTIONS CONT.
Spindle Kit - 2 in. hub
For fixture and other custom installa-
tions. Features 2" (51mm) O.D. spindle
for mounting Readi- Reels and 2"
(51mm) I.D. spools up to 60 lb. (27.2 kg)
capacity.
Order K162-1
SpreadArc Oscillator
Oscillates head across the line of travel.
Calibrated dwell time and oscillation
speed controls permit the Spreadarc to
cover large areas quickly with smooth
beads of minimum admixture.
Order K278
Flux Screen
For submerged arc welding. Removes
large particles from reused flux.
Includes air-driven vibrator.
Order K310
Magnetic Flux Screen Separator
For submerged arc welding. Removes
foreign magnetic particles from reused
flux.
Order K58