Lexmark Z35 - Manual (Page 3)

From Setup to Printing 1
Co
nt
ent
s
Contents
From Setup to Printing . . . . . . . . . . . . . . . 1
Step 1: Make sure your computer is on . . . . . . 2
Step 2: Check the printer parts . . . . . . . . . . . . 2
Step 3: Connect the power supply . . . . . . . . . . 3
Step 4: Connect the USB cable . . . . . . . . . . . . 3
Step 5: Install the print cartridges . . . . . . . . . . 4
Step 6: Load up to 100 sheets of plain paper . 6
Step 7: Install the printer software . . . . . . . . . . 7
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Printing from Windows . . . . . . . . . . . . . . . . . . . . 9
Need help during Windows setup? . . . . . . . . . . 10
Mac OS 8.6 to 9.2 . . . . . . . . . . . . . . . . . . . . . . . . 12
Printing from Mac OS 8.6 to 9.2 . . . . . . . . . . . . 13
Need help during Mac OS 8.6 to 9.2 setup? . . . 14
Mac OS X version 10.0.3 to 10.1 . . . . . . . . . . . . 15
Printing from Mac OS X version 10.0.3 to 10.1 . 16
Need help during Mac OS X version 10.0.3 to 10.1
setup? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Contacting Lexmark . . . . . . . . . . . . . . . . . 18
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
From Setup to Printing
This booklet takes you step by step from setup through
printing your first document using Windows 98, Windows Me,
Windows 2000, Windows XP, Mac OS 8.6 to 9.2, or Mac OS
X version 10.0.3 to 10.1.
For printer setup, you will need:
• A computer with a CD-ROM drive and USB port
• A USB cable (such as Lexmark P/N 12A2405),
purchased separately
• A4 or letter size paper
For additional help while setting up your printer, see:
• Page 10 for Windows 98/Me/2000 and Windows XP
• Page 14 for Mac OS 8.6 to 9.2
• Page 17 for Mac OS X version 10.0.3 to 10.1
Networking tip: You can connect your printer to a
network. For information about networking, and
about purchasing the Lexmark N1 Ethernet Adapter,
visit www.lexmark.com/US/products/N1.