Lava Computer Parallel-PCI/LP Card User Manual
Page 3
necessary files from the diskette, Windows may restart your PC in
order to complete the installation of the Parallel-PCI/LP card. Any
Plug and Play printers attached to the Parallel-PCI/LP will now also
be detected and installed. Windows XP may display a message to
the effect that the drivers are not digitally signed. This warning can
be ignored.
6. The Parallel-PCI/LP card will appear in Control Panel|System|Device
Manager under Ports, as a listing similar to the one below. If
required, settings may be customized by clicking on the Parallel-
PCI/LP listing and then clicking Properties. Please note that changes
to default settings may be required by users connecting the Parallel-
PCI/LP card to a non-printer peripheral (see reverse). Users
connecting a printer should use default settings.