Linksys BUSINESS SPA922 - Manual (Page 128)

Linksys SPA9x2 Phone Administration Guide 121
Monitoring the SPA932
Using the SPA932 Sidecar
Monitoring the SPA932
To display the status of the SPA932, click the SPA932 Status link on the SPA932 tab. The status of
each sidecar attached (Unit 1 and Unit 2) is shown. Parameters are read-only.
SPA932 Unit Monitoring Notes
The following table describes each parameter; both units display the same parameters.
Unit 1 Key 1-32 Enter a strings that define the extension and other parameters
associated with each lighted button on the first SPA932 unit.
Keywords and values are case-sensitive. The configuration
script is described in
”Unit/Key Configuration Scripts”
section on page 118.
Parameter Description
Unit Enable Displays if the Unit is enabled or disabled.
Subscribe Expires Displays when the current subscription expires. After the
subscription expires, the SPA932 automatically requests a new
subscription.
HW Version Displays the version of the hardware.
Unit Online Displays whether the unit is connected or not.
Subscribe Retry Interval Displays the length of time the SPA932 waits to try again if
subscription fails.
SW Version Displays the version of the software currently running on the
unit.
Key Name Displays the name assigned to each key (1-32) on the SPA932
sidecar unit.
Type Displays the function enabled for each key (1-32) on the
SPA932 sidecar unit.
Parameter Description