Linksys BUSINESS SPA922 - Manual (Page 176)

Linksys SPA9x2 Phone Administration Guide
Cisco Confidential--First Draft
169
Ext Tab
SPA9x2 Phone Field Reference
Call Feature Settings
Auth INVITE When enabled, authorization is required for initial
incoming INVITE requests from the SIP proxy.
Ntfy Refer On 1xx-To-Inv
Use Anonymous With RPID
Parameter Description
Blind Attn-Xfer Enable Enables the SPA9x2 to perform an attended transfer
operation by ending the current call leg and performing
a blind transfer of the other call leg. If this feature is
disabled, the SPA9x2 performs an attended transfer
operation by referring the other call leg to the current
call leg while maintaining both call legs. To use this
feature, select yes. Otherwise, select no.
Defaults to no.
MOH Server User ID or URL of the auto-answering streaming audio
server. When only a user ID is specified, the current or
outbound proxy is contacted. Music-on-hold is disabled
if the MOH Server is not specified.
Defaults to imusic when used with a SPA9000 IP PBX.
Message Waiting Indicates whether the Message Waiting Indicator on the
phone is lit. This parameter is toggled by a message from
the SIP proxy to indicate if a message is waiting. You can
manually modify it to clear or set the flag in the Ext 1-6
tab.
Setting this value to Yes can activate stutter tone and
VMWI signal. This parameter is stored in long-term
memory and survives after reboot or power cycle.
Defaults to No.
Auth Page Specifies whether to authenticate the invite before auto
answering a page.
Defaults to No.
Parameter Description