Linksys BUSINESS SPA922 - Manual (Page 194)

Linksys SPA9x2 Administration Guide 187
Configuring a Dial Plan
Dial Plans
Dial Plan parameters contain the actual dial plan scripts for each line (extension) n , where n
is a number from 1 to 4 on the SPA942 and 1 to 6 on the SPA962..
The Dial_Plan[n] for Each Line
n defaults to:
(*xx | [3469]11 | 0 | 00 | <:1408>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011x. )
The default dial plan script for each line is as follows:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.).
If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where ‘@’, ‘.’, and ‘:’ are dialed by
entering *, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and
255, and port must be larger than 255.
If port is not given, 5060 is used. Port and User-Id are optional.
If the user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone
number according to the dial plan. The INVITE message, however, is still sent to the outbound
proxy if it is enabled.