Daylight saving time examples, Selecting a language, Setting regional parameters – Linksys BUSINESS SPA922 User Manual

Page 87

Advertising
background image

Linksys SPA9x2 Phone Administration Guide

80

Selecting a Language

Setting Regional Parameters

Daylight Saving Time Examples

The following example configures daylight savings time for the U.S, adding one hour starting at
midnight on the first Sunday in April and ending at midnight on the last Sunday of October ;
add 1 hour (USA, North America):

start=4/1/7/0:0:0;end=10/31/7/0:0:0;save=1
start=4/1/7;end=10/-1/7;save=1
start=4/1/7/0;end=10/-1/7/0;save=1

The following example configures daylight savings time for Egypt, starting at midnight on the
last Sunday in April and ending at midnight on the last Sunday of September:

start=4/-1/5;end=9/-1/4;save=1 (Egypt)

The following example configures daylight savings time for New Zealand, starting at midnight
on the first Sunday of October and ending at midnight on the third Sunday of March. This only
applie to countries that recognize daylight savings time.

start=10/1/7;3/22/7;save=1 (New Zealand)

The following example reflects the new change starting March 2007. DST starts on the second
Sunday in March and ends on the first Sunday in November:

start=3/8/7/02:0:0;end=11/1/7/02:0:0;save=1

Selecting a Language

This section describes how to localize the SPA9x2 phone display language. You can define up to
nine languages, in addition to English, to be available and host the dictionaries for each of the
languages on the HTTP or TFTP provisioning server. Language support follows Cisco dictionary
principles.

NOTE: For complete information on selecting a language, see the LVS Installation and
Configuration Guide
.

Use the Language Selection parameter to select the phone’s default display language.

The value

must match one of the languages supported by the dictionary server. The script (dx value) is as follows:

<Language_Selection ua="na">

</Language_Selection>

Defaults to blank; the maximum number of characters is 512. For example:

<Language_Selection ua="na"> Spanish

</Language_Selection>

During startup, the phone checks the selected language and downloads the dictionary from
the TFTP/HFTP provisioning server indicated in the phone’s configuration. The dictionaries are
available at the following website:

http://www.linksys-itsp.com

Advertising
This manual is related to the following products: