Lindy 42617 - Manual (Page 8)

English Manual
English 8
When the icon appears on desktop and a small icon appears from taskbar, the
installation is completed.
2.2 Please double click from desktop to activate KMDS if needed.
(*The small icon indicates the ready status. **After AP installation is completed, the AP is in your
computer. The KMDS can be automatically activated but please connect KM Switch with your computers before
turn on computers. ***If you exit the function or unplug KM Switch, you can click KMDS from the desktop to
activate).
C.
The Icon Status:
1. KM Switch function selected:
2. KVM PIP function selected: (left-click on icon to pop-up or close)
3. Data transfer: and pop-up window
4. The KMDS on computers is off-line:
5. The KMDS on computers is on-line:
6. The function display window :
Remote Control Function of KM Switch with a Single Keyboard and Mouse
When you start your computers every time, you can use the Remote Control function to type
password for the computer that is without the keyboard and mouse connected. And, you can
use this valuable function to activate KMDS of the computer if you click Exit to
leave or unplug KM Switch.
1. Please connect the KM Switch with your two computers and then turn on both computers.
Click taskbar icon and KM Switch to switch.