Lexicon 570 - Manual (Page 55)

50
Dancer Communications, Inc.
COMMAND>OUT S
SET/CHECK OUTPUT SETTINGS
========= ====== ========
1 = Output #1 <Label>
2 = Output #2 <Label>
3 = Output #3 <Label>
4 = Output #4 <Label>
0 = Previous Menu
Choose a Number>1
Output #1
PRESENT SETTINGS
======= ========
1 = Label <Label>
2 = On Time per Minute 60
3 = Control Mode Manual
4 = Power-up State OFF
5 = Alarm Mask FF
0 = Previous Menu
Choose a Number>
Labels
Each of the eight output channels can be given a name. Type OUT S and choose from the menu the input
you want to name. A second menu will be given, listing all parameters associated with that input. Choose
menu item #1 Label) and enter the label name for the input. Each label can be up to 12 characters long and
can contain any alphanumeric or printable character.
Hiding Outputs
By typing =HIDE=, you are able to remove this particular item from all reports. To bring the input "out of
hiding," simply enter a new label for that output.
COMMAND>OUT S
SET/CHECK OUTPUT SETTINGS
========= ====== ========
1 = Output #1 <Label>
2 = Output #2 <Label>
3 = Output #3 <Label>
4 = Output #4 <Label>
0 = Previous Menu
Choose a Number>1