Lexmark 2000-Sheet Drawer Optra T - Manual (Page 17)

2000-Sheet Drawer User’s Guide 11
Setting the Paper Type
Once the drawer is installed, you should set the paper type. To set
the paper type, go to the printer operator panel, and then follow
these steps:
1
Make sure the printer power is on and the Ready status
message appears on the display.
2
Press Menu> or <Menu to access the menus.
3
Continue to press and release Menu> until Paper Menu
appears on the display.
4
Press Select to access the Paper Menu.
5
Continue to press and release Menu> until Paper Type
appears on the display.
6
Press Select to show the list of available menu items for the
Paper Type menu.
7
Continue to press and release Menu> until Tray x Type
(where x represents the tray number of the 2000-sheet
drawer) appears on the display.
8
Press Select to show the list of available menu items for
Tray x Type.
9
Continue to press and release Menu> until the paper type
you are using in the 2000-sheet drawer appears on the
display.
10
Press Select to select the paper type.
Note: You may select any operator panel feature available
except
Paper Type = Transparency .
11
Press Go to display the Ready status message.