Skid shoe maintenance, Center skid shoe, Weight box skid shoe – Land Pride RCM6510 User Manual

Page 38: Wing skid shoe, Caution, Table of contents skid shoe maintenance

Advertising
background image

36

Section 5: Maintenance & Lubrication

RC5510 & RC6510 (540 RPM) RCM5510 & RCM6510 (1000 RPM) Rotary Cutter 330-057M

5/29/13

Table of Contents

Skid Shoe Maintenance

!

CAUTION

Excessive wear on skid shoes may cause inadequate operation
of cutter and create a safety hazard!

There is one skid shoe on each wing deck, one on the
weight box, and two on the center deck. The skid shoes
on the center deck may be mounted either under the two
outside corners or, as an alternate location, under the
two inside corners. Check all skid shoes for wear and
replace if necessary. Order only genuine Land Pride
parts from your local Land Pride dealer.

Center Skid Shoe

Refer to Figure 5-9:

Replace center skid shoes as follows:

1.

Remove 5/8" hex whiz nuts (#4), 5/8" hex bolts (#3),
and center skid shoes (#1) from center deck (#2).

2.

Attach new skid shoes (#1) to cutter with existing
5/8" hex bolts (#3) and secure with 5/8" hex whiz
nuts (#4). Tighten nuts to the correct torque.

Weight Box Skid Shoe

Refer to Figure 5-10:

Reverse or replace weight box skid shoe as follows:

1.

Remove 3/8" hex whiz nuts (#3), 3/8"-16 GR5 plow
bolts (#2), and weight box skid shoe (#1) as shown.

2.

Plow bolts (#2) should be checked for wear and
replaced if necessary.

3.

Reverse existing skid shoe (#1) and reattach or
attach new skid shoe to cutter with existing
3/8" plow bolts (#2) and 3/8" hex whiz nuts. Tighten
whiz nuts to the correct torque.

Wing Skid Shoe

Refer to Figure 5-11:

Reverse or replace wing skid shoes as follows:

1.

Remove 3/8" hex whiz nuts (#4), 3/8"-16 GR5 plow
bolts (#3), and wing skid shoe (#2) as shown.

2.

Plow bolts should be checked for wear and replaced
if necessary.

3.

Reverse existing skid shoe (#1) and reattach or
attach new skid shoe to cutter with existing
3/8" plow bolts (#3) and 3/8" hex whiz nuts (#4).
Tighten nuts to the correct torque.

Land Pride Skid Shoe Replacement Parts

Part No.

Part Description

318-628H

CENTER SKID SHOE

318-633D

WING SKID SHOE

318-923D

WEIGHT BOX SKID SHOE

802-466C

PLOW BOLT, 3/8" - 16 x 1 1/1/4" grade 5

Center Skid Shoe

Figure 5-9

Weight Box Skid Shoe

Figure 5-10

Wing Skid shoe

Figure 5-11

24566

Skid Shoe is
Reversible

24720

24719

Skid Shoe is
Reversible

Advertising